There are four videos on how to program PIC16F690 with MPLAB X IDE, for how to create a C file to reading a button, controlling a display and making a breakout board for it. Here are the videos:
See the PIC16F690 official page here.
Also, want to learn how to program ESP32-S2 with microPython? click here.
[…] A series on how to program PIC16F690 with MPLAB X […]
[…] made a series of videos on how to configure the software MPLAB X IDE, watch it here if you feel like doing so. You can see below the way I connected my PIC12F675 to the PICkit3 […]
[…] I am using MPLAB X as the IDE, XC8 as the compiler and PICkit3 as the programmer, as configured here and here. Code was adapted from these sources: here and […]
analog input arduino arm cortex m0+ bicycle speedometer dht11 digital input digital output diy electronics esp12 esp32 esp32 franzininho esp32-c6 esp32-s2 franzininho fritzenlab humidity sensor lcd display led blink led display micropython pi pico 2 pwm raspberry pi raspberry pi pico raspberry pi pico 2 speedometer stm32 temperature sensor wifi
Leave a Reply